Building Automation Lead Field Technician

Position Title: Building Automation Lead Field Technician Position Location: Multiple opportunities available in the following project locations: Atlanta, GA and IAD (priority locations) Denver, CO Texas Northeast USA Central USA JOB SUMMARY The Building Automation Lead Field Technician leads our BAS field teams and activities for building automation system projects including technical support, leadership to plan, schedule and execute installation, startup and testing, commissioning and closeout in mission critical / data center verticals. The Building Automation Lead Field Technician works closely with project managers, systems engineers, software engineers, construction contractors, equipment vendors and client staff to ensure proper operation and acceptance of the automation and software solutions. The Building Automation Lead Field Technician will receive limited direction on day-to-day work and general instruction on new projects or assignments. Will assist project leadership on automation projects of complex scope. Will work independently or under limited supervision. This person will communicate and operate in line with organizational goals and values, as well as departmental objectives. ESSENTIAL FUNCTIONS Installation and Installation Coordination of BAS / HVAC Controls Systems (30%) Direct and monitor subcontractors (onsite and offsite) including scheduling, resource management and coordination of construction and start-up services as needed. Construction trades generally include various electrical, mechanical and equipment suppliers. Install and wire BAS controllers and field devices including low voltage cable terminations Plan site activities for your team including organize job site materials, logistics, inventory, tools storage and security / access Provide technical information and safety guidance for activities on site Lead installation teams on daily and weekly meetings Support the development and execution of additional services through change orders Cutover panels and systems in retrofit projects Develop Methods of Procedure (MOPs) for site activities Provide input to project team on developing RFIs Startup, Commissioning and Closeout of BAS / HVAC Controls Systems (40%) Assist software lead with pre-functional and functional testing Execute troubleshooting of BAS systems including corrective actions Participate in commissioning efforts with external stakeholders Analyze system operation, work with project team to demonstrate system operation and verify consistency with the contracted scope of work Perform QA / QC of BAS and integrated systems using BAS software tools Provide installation inspections and other closeout duties to ensure customer acceptance Provide markups for shop drawings to document asbuilt conditions Reporting and Communication (20%) Project communication and reporting including daily site updates, daily site safety reporting and progress reports Document and track issues and out of scope efforts Communicate regularly with subcontractors, project managers, clients and commissioning agents on project progress Engineering Support and Business Development (10%) Provide input to project teams on estimating and takeoffs for proposals Attend project bid walks Attend engineering surveys for retrofit projects Attend BAS audits and complete related reports and communication Completion of Assigned Tasks and Deliverables on Time and on Budget Performs Other Related Duties as Assigned POSITION REQUIREMENTS (ADVANCED LEVEL FOR ALL THE FOLLOWING) Knowledge of HVAC, mechanical and electrical systems, and materials Knowledge of BAS platforms Distech Controls and Tridium Niagara Knowledge of controls wiring, relay logic, and associated materials Skilled at using MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), along with exceptional organizational skills for file management Skilled in completing assignments accurately and with attention to detail Ability to leverage AI and emerging technologies to streamline workflows, optimize operational processes, and contribute to company-wide innovation Ability to work successfully in a remote environment thru effective communication and organizational skills, self-motivation, proactiveness and resourcefulness in a distraction free workspace Ability to interpret AE construction drawings, BAS shop drawings, manufacturers wiring diagrams, standards documentation, submittals and product data sheets Ability to follow company and site safety requirements Ability to analyze and prepare documents, reports and correspondence Ability to communicate effectively in both oral and written form (technical and non-technical information) Ability to communicate effectively directly with clients and at times serve as primary point of client contact Ability to work under pressure and meet close deadlines Ability to effectively plan and delegate the work of others Ability to achieve certification for NFPA70E and / or OSHA training as required Ability to maintain jobsite and keep it organized Organizational skills, with the ability to manage multiple tasks simultaneously PHYSICAL DEMANDS The following physical demands must be met by the employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is Frequently manipulating, moving or grasping small parts, devices or tools Frequently required to remain in a stationary position Frequently moving through office, critical facility and other environments (such as low temperatures, high temperatures and outdoor elements such as precipitation and wind), including tight and confined spaces Frequently descending / ascending stairs and ladders to access equipment On occasion the employee may be required to position self under or over equipment On occasion the employee may move equipment weighing up to 50 pounds TRAVEL / RELOCATION REQUIREMENTS Travel up to 75% to assigned key project location(s). Must be located near a major US airport. Effective May 7, 2025, and in accordance with U.S. federal regulations for domestic air travel, a valid REAL ID (or an acceptable alternative, such as a passport) is required for travel associated with this position. Travel may involve transportation by car or plane depending on the destination and nature of the business need. Travel is defined as physically leaving home on behalf of business activities including but not limited to client sites, meetings with other employees, meetings for business development purposes, running errands on behalf of the business, attending industry conferences, etc. EDUCATION / EXPERIENCE REQUIREMENTS Bachelor’s degree in engineering, construction or related discipline OR Two years of experience with hands-on installation, testing, validation and troubleshooting of BAS controls infrastructure PLUS Minimum of five years of additional experience with installation, hands-on testing, validation and troubleshooting of BAS controls infrastructure Ample amount of Field experience with complex BAS systems Experience with field installations Exposure to Niagara based products BENEFITS Smart Tech Contracting offers a very competitive benefits package; highlights include Choice of comprehensive medical plans (including two PPO-style plans and a HDHP w/ HSA option) Dental and vision plans Comprehensive medical, dental and vision benefits extended to spouse / domestic partner and dependent children up to age 26 401k with company match and self-directed brokerage account option PTO including additional paid time off during the last week of the year Company paid life insurance coverage for employees and their eligible dependents Short and long-term disability, AD&D coverage Professional development opportunities, tuition reimbursement and professional licensing assistance Paid parental leave after one year of employment CO, CA, IL, NY, WA, and Washington DC residents only: In accordance with CO, CA, IL, NY, WA, and Washington DC law, the range provided is STC's reasonable estimate of the base compensation for this role. The actual amount may differ based on non-discriminatory factors such as experience, knowledge, skills, abilities, and location. Smart Tech Contracting is an EEO/Affirmative Action Employer and participates in the E-Verify program with the Department of Homeland Security. We encourage diversity in our workforce. Are you ready to challenge yourself and redefine standards in the AEC industry? Apply now and join our award-winning team! NOTICE TO THIRD PARTY AGENCIES: STC does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes include any resume or hiring document sent to STC in the absence of a signed Service Agreement where STC has expressly requested recruitment/staffing services specific to the position at hand. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of STC and STC will have the right to hire that candidate without reservation – no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service.

Leads BAS field teams in the installation, startup, testing, and commissioning of building automation systems for mission-critical data centers. Coordinates subcontractors and works with project managers to ensure software solutions meet contracted scopes and client requirements.

Requires a bachelor's degree in engineering or construction, or a minimum of seven years of hands-on BAS controls experience. Must have advanced knowledge of Distech Controls, Tridium Niagara, and the ability to travel up to 75%.

• Medical plans • Dental plans • Vision plans • 401k with company match • Paid time off • Company paid life insurance • Short and long-term disability • AD&D coverage • Professional development opportunities • Tuition reimbursement • Professional licensing assistance • Paid parental leave

• Gestion de projetSouhaitée

Relevées dans la description du poste. Confirmez les exigences importantes ci-dessus.

• BAS Installation
• HVAC Controls
• Distech Controls
• Tridium Niagara
• Commissioning
• Troubleshooting
• Project Coordination
• Controls Wiring
• Relay Logic
• MS Office Suite
• Technical Reporting
• QA/QC
• Site Safety Management
• Blueprint Interpretation
• Resource Management
• Client Communication
• Software Solutions
• Resourcefulness
• Change Orders
• Tridium/Niagara Framework
• Distech (Building Automation System)
• Workflow Management
• Organizational Skills
• Cable Terminations
• Time Off Management
• Project Communications
• Self-Discipline
• Effective Communication
• Emerging Technologies
• Self-Motivation
• Microsoft Access
• Microsoft Excel
• Artificial Intelligence
• HVAC
• Technical Support
• Systems Engineering
• Architectural Drawing
• Auditing
• Automation
• Business Development
• Brokerage
• Building Management System
• Construction
• Electrical Wiring
• Communication
• Electrical Systems
• Engineering Support
• File Management
• Functional Testing
• Leadership

• Engineering
• Trades
• Construction
• Management & Leadership
• Energy
• Building Automation Technician
• Maintenance Supervisor
• Mechanical Engineering Technicians
• First-Line Supervisors of Mechanics, Installers, and Repairers

Formation minimale

Baccalauréat

Expérience minimale

5+ ans

Langue de l’offre

anglais

Heures de travail

40 heures par semaine